Installation; Installing Lens; Installing The Lens - Dahua ITC952-AU3F-L User Manual

When you open the package, check the Camera and accessories against the checklist. After
confirming the package, install the Camera by following the instructions in the manual.
You need to manually install the accessories such as lens, TF card, cables, and corrugated pipe. For
other accessories and connections, install according to the actual condition.

3.1 Installing Lens

Power off the Camera before installing the lens. Otherwise, the lens might be damaged.

3.1.1 Installing the Lens

Step 1 Remove the protective covers of sensor and lens. Insert the spacer in between the lens and
the camera.
Step 2 Align the lens to the lens mount position on the camera, and turn the lens clockwise until it
is securely mounted.
Step 3 Insert the cable plug of lens into the auto iris lens connector on the side panel of camera.
Step 4 Correct the focus to make the images clear.

3 Installation

Figure 3-1 Install the lens
13
User's Manual