Connecting Cable; Installing The Cable - Dahua ITC952-AU3F-L User Manual

3.3 Connecting Cable

You need to use a 2.0 mm screwdriver to connect cables.
● Avoid copper wire exposure when connecting the power cord. With 220 V power supply, copper
wire exposure might cause electric leakage, and thus bringing personal injury.
● When removing the cable, turn off the power of the Camera first to avoid leakage. This helps
prevent personal injury.
● To ensure the Camera is properly grounded and improve device reliability, make sure that: ①
The device port
connected to the ground.
● The picture is for reference only, and might differ from the actual device cable.

3.3.1 Installing the Cable

Step 1 Insert the screwdriver into the square slot corresponding to the connecting cable. Press
Figure 3-4 Removing TF card
is connected to the PE (earth wire) of the protective cover. ② The PE is
Figure 3-5 Cable connection example (1)
15
User's Manual