Removing The Lens; Installing Tf Card; Installing The Tf Card; Removing The Tf Card - Dahua ITC952-AU3F-L User Manual

3.1.2 Removing the Lens

Step 1 Unplug the cable from the lens mount.
Step 2 Turn the lens to counter-clockwise until the lens is removed.
Step 3 Install the protective covers of sensor and lens to prevent them from being spotted.

3.2 Installing TF Card

This section takes some models as the example, and might differ from the actual model.

3.2.1 Installing the TF Card

Orient the TF card to make the teeny triangle on the card points toward the open slot, and then
gently shove the card all the way into the slot.

3.2.2 Removing the TF Card

Remove the TF card according to the direction shown by the arrow.
Figure 3-2 Removing lens
Figure 3-3 Installing TF card
14
User's Manual