Table of Contents
Advertisement
G Installation procedure
Accomplish installation by reversing the removal procedure.
N NOTE N
When installing a memory board, observe the following precautions:
• Do not touch the connector section of the memory board. Handle the memory board
only by its edges.
• Open the CN17/CN18 claws, align the cuts in the memory board with the protrusions in
the CN17/CN18 socket, hold both ends of the memory board, and insert the memory
board horizontally into the socket.
(1) Mount the memory board (DIM08A board) in the connector (CN17/CN18) on the
MTH08D board.
MTH08D board
N CHECK N
Check that the CN17 and CN18 claws are closed to properly secure the memory boards.
009-058-03
08.30.2002 FM3476
Notched
edge
CN18
CN17
Tab
CR-IR347 Service Manual
MC - 398
Tab
Notch
DIM08A board
Push both
ends of
the module.
FR7H3845.EPS
MC - 398
Advertisement
Table of Contents
