I Installation procedure
N NOTE N
Ensure that the triangular cams are properly oriented when they are installed over the
shafts.
FRONT
To accomplish installation, reverse the removal procedure.
I Check/adjustment procedure
After completion of wire (left side) installation, conduct the following checks:
• Check that the wires are properly threaded along their paths.
• Rotate the cams by hand to check for an improper grip mechanism operation (rubber
roller grip/release operation).
• Check that the rubber rollers can be rotated while their grips are activated.
009-058-00
10.20.2000 FM2732 (2)
FR7H3133.EPS
CR-IR347 Service Manual
MC - 232
MC - 232