Siemens FUJI-Reader CR-IR347 Service Manual page 255

I Installation procedure
N NOTES N
• Ensure that the cam screw is attached to the flat-machined surface of the shaft.
• Make sure that the cam rib is not installed with right and left reversed.
Spacer
SW4
To accomplish installation, reverse the removal procedure.
009-058-00
10.20.2000 FM2732 (2)
Bearing
Rib positioned
Cam
outside
Flat-machined
surface
CR-IR347 Service Manual
MC - 248
Cam
Bearing
Spacer
SW4
Rib positioned
inside
Flat-machined
surface
FR7H3149.EPS
MC - 248