Siemens FUJI-Reader CR-IR347 Service Manual page 277

I Replacement procedure
G Summary of replacement procedure
The replacement parts and procedures differ depending on the shipment control number and
type of the scanning optics unit installed. Combinations of the parts for replacement and
their procedures are summarized in the table below.
Parts number of
Shipment
scanning optics unit
control number
installed
839Y0029 ✻
#2001–#2067 or
839Y0030 ✻
#2001–#2067
839Y0048 ✻
or
#2068–#2069,
839Y0049 ✻
#5001–#5004
#5005–
✻: Latest version
850Y0048 (with the LD assembly)
(*1) 839Y0050
Spacer
850Y0049 (without the LD assembly)
(*2) 839Y0051
Spacer
009-058-03
08.30.2002 FM3476
Parts number of
Procedures needed
scanning optics
unit ordered
839Y0050 ✻ (*1)
• Attach the spacers.
• Replace the scanning optics unit.
or
839Y0051 ✻ (*2) • Disconnect the ground cables.
• Replace the scanning optics unit.
839Y0048 ✻ (*1)
• Disconnect the ground cables.
or
839Y0049 ✻ (*2)
• Replace the scanning optics unit.
CR-IR347 Service Manual
for replacement
G For #2001 to #2067
G For #2001 to #2067
G For #2068, #2069, or
G For #5005 or later
MC - 265.1
Reference
(machines installed with
839Y0029* or 839Y0030*)
(machines installed with
839Y0048* or 839Y0049*)
#5001 to #5004
TR7H6011.EPS
MC - 265.1