Siemens FUJI-Reader CR-IR347 Service Manual page 100

(3) Remove rubber rollers C and D.
Housing
Roller bearing
Rubber roller D
Rubber roller C
I Installation procedure
N INSTRUCTION N
The extension spring size varies with the mounting location. When installing the
extension springs, pay due attention to their mounting locations.
To accomplish installation, reverse the removal procedure.
I Check procedure
Make sure that the anti-static member is brought into contact with the roller.
009-058-02 009-058-00
08.30.2001 FM3142 10.20.2000 FM2732 (2)
#1
[Remove] Gear (x2)
#2
[Remove] Extension spring (L = 80 mm)
CR-IR347 Service Manual
Anti-static member
CHECK
Roller bearing
[Remove]
Extension spring
(L = 92 mm)
Timing belt pulley
MC - 93
Housing
#4
#3
[Remove] E6
FR7H3212.EPS
MC - 93