Siemens FUJI-Reader CR-IR347 Service Manual page 110

I Installation procedure
To accomplish installation, reverse the removal procedure.
N NOTE N
When mounting the supports and spacers on the IP removal arm, ensure that surfaces A,
B, and C are flush with each other. Also, ensure that surfaces D, E, and F are flush with
each other.
Support
Spacer
IP removal arm
I Check procedure
After completion of support installation, conduct the following checks:
• Check that IP removal arm surfaces A and D are flush with each other.
• Check that the forward and backward slides of the IP removal arm are smooth and that
the bearings and other parts are not displaced.
• Slide the IP removal arm forward and backward to check that the hose does not
interfere with the other parts or become twisted.
009-058-00
10.20.2000 FM2732 (2)
Support
D
E
F
IP removal arm
CR-IR347 Service Manual
Support
Spacer
IP removal arm
D
E
Spacer
F
MC - 103
A
B
C
A
Support
B
Spacer
C
FR7H3223.EPS
MC - 103