14. Removing and Installing the Monitor
14.1 CRT (Monitor)
WARNINGS
• When replacing the monitor, be sure to turn OFF the circuit breaker. If you replace the moni-
tor with the circuit breaker ON, you may receive a shock.
• Since the monitor contains sections where a high voltage is generated (see the figure below),
never touch them. If any foreign matter enters the monitor, be sure to remove it. Allowing
such foreign matter to stay within the monitor will cause a risk of fire or electric shock.
: Never touch the shaded sections.
009-058-03
08.30.2002 FM3476
FR7H3092.EPS
PC board (700 V max.)
PC board
Deflection yoke coil
CR-IR347 Service Manual
(250 V max.)
MC - 382
Anode cap
Flyback transformer
PC board (700 V max.)
Anode lead
(approx. 12 kV)
FR7H3413.EPS
MC - 382