Siemens FUJI-Reader CR-IR347 Service Manual page 397

G For 850Y0117
(1) Remove the HDD.
"I Removal procedure"
(2) Peel the dark-blue film off the new sheet.
(3) Attach a new sheet to the parts-mounted surface of the HDD.
CAUTIONS
Do not attach the light-blue film face of the sheet to the parts-mounted surface of the
HDD. Also ensure that the sheet does not come atop any of the bumps of the HDD. If it
is attached to the parts-mounted surface, a short-circuit may occur.
(2) Dark-blue film
(4) Install the HDD.
"I Installation procedure"
(5) Make adjustment after replacement..
"I Check/adjustment procedure"
009-058-03
08.30.2002 FM3476
(3) Sheet
CR-IR347 Service Manual
Light-blue film
Parts-mounted surface
Bump (x4)
HDD
T
O
P
FR7H3471.EPS
MC - 370
MC - 370