Vm Card Installation; Enabling App2Me - Ricoh Aficio MP C3001 Service Manual

VM Card Installation

The App2Me application must be enabled before it can be used. The VM SD card including
App2Me is provided with the main machine.
Do the following procedure if a customer wants to use "App2Me".
1. Turn off the machine if it is in use.
2. Remove the SD slot cover [A] (
3. Insert the VM SD card [B] in slot 2.
4. Attach the SD slot cover [A] (
5. Turn on the machine.

Enabling App2Me

The following procedure basically should be done by a customer.
1. Press the [User Tools] key on the operation panel.
2. Touch the "Extended Feature Settings" button twice.
3. Touch the "App2Me" line under the Startup Setting tab.
4. Touch the "Extended Feature Info" tab on the LCD.
5. Touch the "App2Me" line.
6. Set "Auto Start" to "On".
7. Touch the "Exit" button.
8. Exit the "User Tools" settings.
Do not remove the VM card from Slot 2 (lower slot). The VM card must remain in the
machine.
D086/D087
x 1).
x 1).
2-20
Copier Installation
SM