Ricoh Aficio MP C3001 Service Manual page 774

14. Send a job to the printer. The Communicating light should start blinking as shown below.
15. As soon as the printer receives the data, it will be stored on the SD card automatically
with no print output. Nothing is displayed on the screen, indicating that a Card Save
operation was successful.
16. Press "Offline" and then the "Clear/Stop" button to exit Card Save mode.
17. Change the Bit Switch Settings back to the default 00000000. Press the "#" button in the
numeric keypad to register the changes.
18. Remove the SD card after the main power switch is turned off.
D086/D087 5-424
Card Save Function
SM