2.5.2 INSTALLATION PROCEDURE
1.
Put the caster table on a flat place.
2.
Grasp the handle [A] and grips [B] of the machine, if the copier is to be installed on the
caster table.
3.
Lift the copier or one-tray paper feed unit [C], and then install it on the caster table [D].
Hold the handle and grips of the machine when you lift and move the machine.
4.
Pull out tray 2 of the mainframe or the tray of the one-tray paper feed unit.
5.
Secure the machine or one-tray paper feed unit to the caster table (stud screw x 1)
6.
Reinstall the tray in the mainframe or one-tray paper feed unit.
7.
Adjust the five leveling adjustors of the caster table.
D086/D087
2-26
Caster Table Type A (D446)
SM