Adding Demographics; Loading Previous Data; Contin. Previous - GE Healthcare B30 User's Reference Manual

B30 Patient Monitor

Adding demographics

Admit/Discharge
1.
2. Select Admit Patient - Demographics.
3. Enter patient data: Height is adjustable from 15 to 250 cm (5 in to 8 ft 2 in), Weight is
adjustable from 1 to 250 kg (2 to 555 lb).
The body surface area, BSA, is calculated automatically by using du Bois formula. The
body surface area is used in calculating index values of some parameters.

Loading previous data

If the patient has already been admitted on the same monitor and this monitor has been
restarted, the Contin. Previous will be appeared.
Admit/
Discharge

Contin. Previous

Select this to load the most recent patient trends from the monitor memory when less than 15
minutes has elapsed from the turn-off. If the patient has been discharged but the monitor has
been on, you can retrieve approximately the last 24 hours.
NOTE: This selection is available if the patient is already admitted on this monitor.
7-2
key.