Changing The User Mode - GE Healthcare B30 User's Reference Manual

B30 Patient Monitor

Changing the user mode

The monitor always starts in startup mode. The startup mode is one of the user modes, and it is
chosen during configuration.
To change from the startup mode to another mode:
1. Press
2. Select one of the following modes:
STEP-DOWN
ED
PACU
CCU
NEURO
PEDIATRIC
Admit/
Discharge
The selected mode is marked with a circle. You can return to the previous mode by selecting
Return to X.
During monitoring, you can make additional changes to the mode settings and, to make the
changes permanent, save them through the Save Modes menu.
5-6
Admit/Discharge
and select Select Mode.
Mode for intermediate care
Mode for emergency care
Mode for post-anesthesia care
Mode for ECG and ST care
Mode for neurological monitoring
Mode for pediatric ICU monitoring