Setting up the tripod
1.
1.
1.
2.
2.
2.
1. Loosen screws of tripod legs,
pull out to required length and
tighten screws.
2. In order to guarantee a firm
foothold sufficiently press the
tripod legs into the ground.
When pressing the legs into
the ground note that the force
must be applied along the legs.
RUNNER 20/24-1.0.1en
When setting up the
tripod pay attention to a
horizontal position of the tripod
plate.
Heavy inclinations of the tripod
must be corrected with the
footscrews of the tribrach.
11
11
Careful handling of tripod
• Check all screws and bolts for
correct fit.
• During transport always use
the cover supplied.
Scratches and other damages
can result in poor fit and
measuring inaccuracies.
• Use the tripod only for
surveying jobs.
Measurement preparation