Table of Contents
Advertisement
RxD, TxD Active
Choose Hi/Hi, Hi/Lo, Lo/Hi, or
Lo/Lo (default).
•: The above 2 options will not work
unless UART2 Mode
HPSIR/ASKIR is selected.
IR Transmition
Enabled: Enabled delay when
Delay
Disabled (default) Disabled delay
Onboard Parallel
Choose the printer I/O address:
Port
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
Parallel Port Mode Choose SPP (default), ECP + EPP
EPP, or ECP mode. The mode
depends on your external device
that connects to this port.
Choose DMA3 (default) or DMA1.
ECP Mode Use
DMA
Most sound cards use DMA1.
Check with your sound card
configuration to make sure that
there is no conflict with this
function.
*: This option will not be displayed
unless the EPP/ECP function is
selected.
EPP Mode Select
Choose EPP1.7 (default) or EPP1.9.
EPP1.9 supports hardware
handshake. This setting is
dependent on your EPP device.
Note:
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
40
transfers data.
when transfers data.
The above 2 options will not
be displayed unless the
EPP/ECP
function
is
selected.
Advertisement
Table of Contents
