Cpu Installation - SOLTEK SL-67D Manual

CPU Installation

Follow the following steps in order to install your Intel
Pentium II , Celeron (Mendocino), and Deschutes properly.
Step 1:
Be sure you are in contact with heat sink vendors for
attaching the heat sink on to the CPU.
Latch
Intel Pentium II (or Celeron)
CPU Side View
Heat Sink
Latch
CPU Top View
Notice that the heat sink may be different from the drawings
shown here.
Step 2:
Install the 2 pairs of screws, which are shown in the
following drawing, onto the mainboard under the SLOT1
Socket.
Two of the screws are right around the SLOT1 Socket and
the other pair of screws should be inserted opposite the first
pair. The screws should be inserted from the bottom of the
motherboard upward.
8
Heat Sink
Intel Pentium II, Celeron (Mendocino), Deschutes