Table of Contents
Advertisement
Quick Power On
Choose Enabled (default)or
Disabled. This option allows you to
Self Test
speed up the Power On Self Test
routine.
Boot Sequence
Default is ÒA, C, SCSIÓ. This option
determines which drive to look for
first for an operating system.
Swap Floppy Drive Choose Enabled or Disabled
(default). This option swaps floppy
drive assignments when it is
enabled.
Boot Up Floppy
Enabled: During POST, BIOS
Seek
checks the track number of the
floppy disk drive to see whether it
is 40 or 80 tracks.
Disabled: During POST, BIOS will
not check the track number of the
floppy disk drive.
Boot Up NumLock
Choose On (default) or Off. This
Status
option lets user to activate the
NumLock function at boot-up.
Gate A20 Option
Choose Normal or Fast (default).
This option allows the RAM to
access the memory above 1MB by
using the fast gate A20 line.
Typematic Rate
Choose Enabled or Disabled
(default). Enable this option to
Setting
adjust the keystroke repeat rate.
Typematic Rate
Range between 6 (default) and 30
(Chars/Sec)
characters per second. This option
controls the speed of repeating
keystrokes.
24
Advertisement
Table of Contents
