Table of Contents
Advertisement
PM Control by
Choose Yes or No (default). You
need to choose Yes when the
APM
operating system has the APM
functions, choose No otherwise.
Video Off Option
Choose NA, Suspend, Standby
(default), or Doze.
Video Off Method Choose Blank , DPMS, or V/H
Sync+Blank (default). You can
chose either DPMS or V/H
Sync+Blank when the monitor has
the Green function. You need to
choose Blank when the monitor has
neither the Green function.
MODEM Use IRQ Assign the IRQ number to the
modem which is being used so that
the ring signal can wakeup the
system. The default setting is 3
(COM2).
Soft-Off by PWR-
Instant-off: (default) turns off the
BTTN
Delay 4 Sec: turns off the system
HDD Power Down Time is adjustable from 1 to 15
minutes. When the set time has
elapsed, the BIOS sends a command
to the HDD to power down, which
turns off the motor.
Doze Mode
This option sets the CPU speed
down to 33MHz during this mode.
30
system power at once
after pushing the
power button.
power 4 seconds after
pushing the power
button (to meet PC97
spec.)
Advertisement
Table of Contents
