Configuring The Mcwdt - Infineon XMC7000 Series Using Manual

Using the Watchdog Timer in XMC7000 family MCUs
Multi-counter WDT
Deep Sleep Pause: Enable
−
Debug mode: Enable
−
Subcounter 1: Same as Subcounter 0
•
Subcounter 2:
•
Action: Interrupt
−
Auto service: Enable
−
Deep Sleep Pause: Enable
−
Debug mode: Enable
−
3.7.2

Configuring the MCWDT

You can configure the parameters in Peripherals tab of the Device Configurator as shown below; then
ModusToolbox™ generates the corresponding code automatically.
Double-click design.modus to open the Device Configurator.
Application Note 19 of 33 002-33887 Rev. *A
2022-05-25