Connecting Copper Ports; Installing Sfp Modules - Lantronix SISPM1040-384-LRT-C Install Manual

Lantronix Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C

Connecting Copper Ports

1. Connect the provided DB-9 to RJ-45 Console Cable to a PC or Terminal.
2. Connect the Ethernet RJ45 Ports to the Ethernet cables/far end devices. Only connect PDs which support
power input in 48~56V range to prevent damage to PDs.

Installing SFP Modules

On the SISPM1040-384-LRT-C, you can install or remove an SFP module from a SFP port without having to power
off the switch.
Note: Use UL Listed Transceiver SFPs rated 3.3Vdc, Laser Class 1. See the SFP manual for cautions and warnings.
1. Insert the module into the SFP port.
2. Press firmly to ensure that the module seats into the connector.
Figure 7: Installing an SFP Module into an SFP Port
33727 Rev. J https://www.lantronix.com/ Page 17 of 51