Table of Contents
Advertisement
Instructions for Use
Surgical Laser Unit Limax
6.20.6
Creating a SWAP
®
The Limax
120 allows you to change a program into an A/B program, in which case you can
select among 2 parameter sets. This is called SWAP
parameter set to the other parameter set can be done in two ways: with the small SWAP
pedal (2, Fig. 6-18) or via the display. The SWAP
between the two parameter sets directly with the foot switch while working in the sterile area,
without any need to operate the LASER READY button each time.
Revision 5
®
120
®
A/B Program
®
mode. Changing over from one
®
pedal enables the surgeon to toggle
In a first step, an A/B mode is created for the
currently active program.
You can use an existing program as active
program, or you can create a new program for
this purpose.
Select the menu item Create A/B mode to
create a second parameter set in A/B mode in
addition to the currently active program.
This splits the parameter section of the display
screen to duplicate the set of parameters of the
active program.
•
To exit the A/B mode submenu, select
BACK.
®
73
Advertisement
Table of Contents
