Drain Fuel Pre-Filter - Hitachi ZAXIS 130-6N Operator's Manual

Drain Fuel Pre-Filter

--- daily
IMPORTANT: Drain fuel pre-filter daily before starting
operation. The engine may be damaged if you do not
drain fuel pre-filter daily.
The fuel pre-filter has a water separator function. There is a
float (8) inside the case which buoys when water accumulates.
Check float (8) position daily. Be sure to drain the water
accumulated in the pre-filter until float (8) goes to the bottom
of pre-filter case.
Drain Procedures
1. Place 0.5 liter (0.5 US qt) or larger capacity container
under drain hose (6).
2. Rotate drain plug (5) on the bottom of the pre-filter case
counterclockwise. Drain the water accumulated in the
pre-filter until float (8) goes to the bottom of pre-filter
case. If it is difficult to drain, loosen plug (1) on the top of
the pre-filter.
3. After draining water, securely tighten drain plug (5) and
plug (1).
4. Start the engine. Check drain plug (5) and plug (1) for
fuel leaks.
IMPORTANT: After draining water mixed in fuel, bleed air
from the fuel supply system.
Wrench size: 14 mm
1
8
5
6
MAINTENANCE
Pre-Filter
Pre Filter
MDC1-07-092
7-61
ZX160LC-6N, 180LC-6N
ZX130-6N
ZX210-6N, 210LC-6N, 250LC-6N
ZX300LC-6N, 350LC-6N, 380LC-6N
MDC1-07-072
MDC1-07-081
Pre-Filter
MDC1-07-035
Pre-Filter
MDC1-07-036