Audio Input (Optional) - Hitachi ZAXIS 130-6N Operator's Manual

Audio Input (Optional)

IMPORTANT: This function is available only to a machine
equipped with an audio input (optional). Use this
function with proper sound volume.
Audio Input Selection
Attach the audio input (optional) device and push AM/FM
Selector/Tuning Switch (1) to display AM and FM screen as
well as AUX input screen (3).
Connecting audio device
By removing AUX IN Cap (4), the audio input terminal
appears.
Connect your audio device to the audio input terminal of
the machine with your audio cable.
IMPORTANT:
 Use Φ3.5 mm stereo plug for the connection of audio
input terminal.
 Put AUX IN cap (4) when the audio input is not in use.
Volume Control of audio device
Turn the volume down to the minimum beforehand, and
then turn volume control knob (2) clockwise to adjust the
volume.
IMPORTANT:
 If volume control knob (2) has been set to the
maximum level the sound will be extremely loud. Set
volume control knob (2) to the minimum first and
then turn it clockwise to increase the volume. Adjust
the volume control knob on the audio device if the
sound is too low, even when the volume control
knob (2) is set to the maximum level.
 Operate your audio device to play or stop the sound.
OPERATOR'S STATION
1-123
1
2
MDCD-01-026
3
MDC1-01-340
4
MDAA-01-341