ON/OFF Operation Switch (Optional)
Attachment Switch (Assist Operation)
This switch is mainly used for optional devices and
attachments having a rotary or tilt function. The attachment
moves only when the switch is pressed.
IMPORTANT: When the ( ) mark side of ON/OFF operation
main switch (1) is pressed, the attachment switch
becomes operable.
AUX Function Lever 3
1. Attachment Switch (Assist Operation)
2. Power Boost Switch
3. Auxiliary
4. Auxiliary
5. Horn
6. Attachment Switch (Assist Operation)
d
CAUTION:
These switches are provided for operating
attachments of this machine. Hitachi does not bear
responsibility on any human injury, malfunction
and/or physical loss or damage incurred by
unauthorized application or use of unauthorized
attachments, optional parts or modified switches,
that void the Hitachi Warranty Policy.
Before using this switch, thoroughly read the
operation manual of the corresponding attachment
and check the operation of each function in a safe
area.
Before operating an attachment with this switch,
confirm the requirements on safe and proper
mounting and operation of the attachment with its
manufacturer or distributor and observe them.
OPERATOR'S STATION
1-106
6
4
5
Left Control Lever
MDAA-01-337
MDAA-01-356
3
1
2
Right Control Lever
MDAA-01-337