Swing Internal Gear - Hitachi ZAXIS 130-6N Operator's Manual

Swing Internal Gear

--- every 500 hours
d
CAUTION: Before lubricating the machine, lower the
bucket on the ground, stop the engine and pull the
pilot control shut-off lever to the LOCK position.
1. Remove cover (1) from upperstructure. Check if the
swing internal gear is properly lubricated by grease. Add
approximately 0.5 kg of grease, if required.
If the grease is contaminated, remove grease by opening cover
(2) at the undercarriage side and change with clean grease.
Model
ZX130-6N
ZX160LC-6N, 180LC-6N,
210-6N, 210LC-6N, 250LC-
6N, 300LC-6N
ZX350LC-6N, 380LC-6N
MAINTENANCE
Grease Capacity
9 L (2.4 US gal)
17 L (4.5 US gal)
19 L (5.0 US gal)
7-31
1
ZX130-6N, 210-6N, 210LC-6N,
250LC-6N, 300LC-6N, 350LC-6N, 380LC-6N
ZX160LC-6N, 180LC-6N
2
MDC1-07-038
1
M104-07-002
M157-07-161