Battery Disconnect Switch; Switch Operation - Hitachi ZAXIS 130-6N Operator's Manual

Battery Disconnect Switch

IMPORTANT: Do not turn the battery disconnect switch
OFF while engine is running or the key switch is in
another position than the OFF position. Failure to do
so may damage the electrical system.
The battery disconnect switch differs from the engine start
key switch. When the battery disconnect switch is turned OFF,
the electrical system is cut off, so no electric current flows into
the entire circuit.
Before turning the battery disconnect switch OFF, be sure
to turn the key switch OFF and wait 5 minutes or more after
the engine stops. If the battery disconnect switch is turned
OFF within 5 minutes after the engine stops, it may result
in malfunction of the electrical system. When the battery
disconnect switch is turned from OFF to ON, the preset data
of the radio or clock may be initialized. Set the radio and clock
again.
Use the battery disconnect switch for the following purposes
only.
 Before maintaining or servicing the electrical system
 Before storing the machine for long period of time,
preventing the battery discharge
 Before welding operation on the machine body
 Before replacement of the battery

Switch Operation

1. Open cover (2).
When lever (1) is in the horizontal position, the battery
disconnect switch is ON. When lever (1) is in the
horizontal position, lever (1) can not be removed.
2. When lever (1) is turned counterclockwise to the vertical
position, the battery disconnect switch turns OFF. Lever
(1) can be removed from the battery disconnect switch
when it is in the OFF position.
IMPORTANT: The DEF/AdBlue® Pump runs for a while
after the engine stops to return DEF/AdBlue® from
piping to the DEF/AdBlue® tank. Do not turn the
battery disconnect switch to the OFF position during
this time. Otherwise, the Urea SCR system may be
damaged.
OPERATOR'S STATION
1-143
MDC1-01-503
2
1
ON MDC1-01-504
1
OFF
MDC1-01-505