Hitachi ZAXIS 130-6N Operator's Manual page 245

Hydraulic excavator

Table of Contents

The selected work mode is indicated by attachment mode

indicator (2) on Basic Screen (1).

Select the work mode corresponding to the work in which the

machine is engaged, referring to the table below.

Digging Mode

Breaker 1 to 5 Mode

Pulverizer 1 to 5 Mode

Crusher 1 to 5 Mode

Vibrating Hammer 1 to 5

Grapple 1 to 5 Mode

Clamshell 1 to 5 Mode

Thumb 1 to 5 Mode

Tilting Rotator 1 to 5 Mode

Tilting Bucket 1 to 5 Mode

Others 1 to 5 Mode

NOTE: 51 work modes shown above are designated

as standard specifications. Up to 11 attachment modes

other than digging mode can be designated. Consult your

authorized dealer for adding or changing the designation of

the attachment modes.

OPERATING THE MACHINE

Select this mode when using bucket.

Select this mode when using breaker.

Select this mode when using pulverizer.

Select this mode when using crusher.

Select this mode when using vibrating hammer.

Select this mode when using grapple.

Select this mode when using clamshell.

Select this mode when using thumb.

Select this mode when using tilting rotator.

Select this mode when using tilting bucket.

Select this mode when other than the above attachment is used.

Troubleshooting