LIQUID CRYSTAL DISPLAY (LCD), DISPLAY
SELECTION SWITCH, SET SWITCH
LCD (12) displays 3 kinds of information such as Hour
Meter, Trip Meter 1 and Trip Meter 2.
NOTE: Immediately after the key switch is turned "ON",
the LCD always displays the Hour Meter
Selecting Display
Each time display selection switch (3) is pressed, the LCD
displays the Hour Meter, Trip Meter 1, and Trip Meter 2 in
that order. In case the LCD has been set to display the En-
gine Speed, and Hydraulic Oil Temperature, these kinds of
information will be displayed after the Trip Meter 2 is dis-
played.
HOUR METER
The LCD displays the total hours of operation [accumu-
lated hours of operation] since the machine started working
in hour [h]. The tenth of an hour (6 minutes) is displayed by
one digit beyond decimal point. During the Hour Meter dis-
play, the hour meter mark lights on the display screen.
While the machine is operating, the decimal point flashes.
NOTE: The hour meter reading can be checked by de-
pressing display selection switch (3) for longer
than 0.5 seconds even though the key switch is
"OFF". The LCD continues to display the hour
meter reading as long as display selection
switch (3) is kept depressed. When the switch
is released, the LCD stops displaying.
OPERATOR'S STATION
1-6
12
Hour Meter Mark
When Hour Meter is Displayed:
3
4
M1CC-01-100
M178-01-006