Output Signal Connections - Presys DMY-2011 Technical Manual

PRESYS
|
Instruments

2.4 - Output Signal Connections

The Indicator can have up to four output signals: output 1, output 2, output 3
and output 4. Outputs 1 and 2 are used as retransmitter or alarm outputs. Outputs 3
and 4 are used only as alarm outputs.
For outputs 1 and 2, there are six different types of outputs available:
retransmitter (4 to 20mA, 0 to 5Vdc or 0 to 10Vdc), SPST relay, open collector
voltage and solid state relay.
For outputs 3 and 4, there are three different types of outputs: SPDT relay,
open collector voltage and solid state relay. Figure 10 shows the Indicator output
types.
DMY-2011, DMY-2035 and DMY-2036
Installation
Page 14