Volt Or Millivolt Input - Presys DMY-2011 Technical Manual

PRESYS
|
Instruments
DMY-2011, DMY-2035 and DMY-2036

2.3.4 - Volt or Millivolt Input

0 to 55 mVDC or to 0 to 5 VDC must be applied to terminals 2 (+) and 3 (-) for
input 1 and to terminals 5(+) and 6(-) for input 2. 0 to 10 VDC must be applied to
terminals 1(+) and 3(-) for input 1 and to terminals 4(+) and 6(-) for input 2. The
connections are shown in figure 9.
Figure 9 - Volt or millivolt Input
Installation
Page 13