PRESYS
|
Instruments
2.6 - Communication
DMY - 2011, 2035 and 2036 Indicators can communicate with computers
through RS-232 or RS-422/485 using MODBUS protocol communication software,
when the optional communication module is installed and the communication
parameters are configured.
Specific information on communication and signal connection is described in
the communication manual.
2.7 - Engineering Units
A label with several Engineering Units is supplied with each Indicator. Select
the one corresponding to the variable shown on the display and stick it to the front
panel of the Indicator.
DMY-2011, DMY-2035 and DMY-2036
Installation
Page 18