Quick Setup; System; General - Direct IP IDIS DC-D4537RXA Operation Manual

Part 1 - Remote Setup

Quick Setup

Quick Setup allows you to set up System, Network,
Video, Audio, and other basic settings needed for
camera use.

System

Change the camera's system information, add users/
groups, and/or import/export settings.
8

General

• Language: Select the language you wish to use for
remote setup.
• Name: Enter a name for the camera. (Up to 31
alphanumeric characters, including spaces)
• Note: Enter a description for the camera.
• Product: Indicates the model name of the camera.
• HW Version/SW Version: Indicates the camera's
hardware and software versions.
• MAC Address: Indicates the MAC address of the
camera.
• Miscellaneous
- ONVIF Protocol: Select to enable ONVIF protocol
use. However, ONVIF Protocol is available only
to users belonging to the standard user groups
(Administrator, Operator, and User). When you
have connected to the camera by using the ONVIF
protocol, only the currently enabled streams or
events are supported and you cannot change it.
There may be some more settings that cannot be
changed, too. If you want to change those settings,
connect to the camera by using the IDIS Discovery
program.
- ONVIF Event Type
• Normal: This is the usual way the camera delivers
events.
• Standard: This is the ONVIF standard event
delivery method.
- Opensource Licenses: Click View to see the
information of opensource licenses.