Direct IP Idis DC-D4217RX Quick Manual
Hide thumbs Also See for Idis DC-D4217RX:

Advertisement

Quick Links

Network
Camera
Quick Guide
DC-D4217RX
Powered by

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Idis DC-D4217RX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Direct IP Idis DC-D4217RX

  • Page 1 Network Camera Quick Guide DC-D4217RX Powered by...
  • Page 2: Safety Precautions

    Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated.
  • Page 3: Fcc Compliance Statement

    FCC Compliance Statement THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
  • Page 4: Camera Installation

    Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may differ depending on the situation. Item Network Camera Quick Guide Guide Pattern Screws Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link : - IDIS Website (www.idisglobal.com) - Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact.
  • Page 5: Closing The Dome Cover

    Closing the Dome Cover Remove the dome cover. Attach the dome cover to the bottom cover. Turn the dome cover clockwise to fasten the dome cover. Installation Use the provided guide pattern to check the Angle Adjustment distance between the screw holes if necessary. Use the screws, anchor provided with the camera to secure the body on a wall or a ceiling.
  • Page 6: Specifications

    Specifications Operating Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F) Boot Up Temperature 0˚C ~ 50˚C (32˚F ~ 122˚F) Operating Humidity 0% ~ 90% Power Source PoE (IEEE 802.3af Class 2) Power Consumption PoE, IEEE 802.3af(Class2),3.8W Approval FCC, CE External Dimensions (Ø x H) 130mm x 81.4mm (5.11”...
  • Page 12 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...

Table of Contents