Streaming - Direct IP IDIS DC-D4537RXA Operation Manual

Miscellaneous
Configure Miscellaneous settings.
• IR strength: Set the brightness of the IR LED. The
higher the value is set, the brighter it is.

Streaming

• Primary/Secondary/Tertiary/Quaternary:
Multistreaming is supported. Enable/disable
streaming use. The stream you set first has priority.
• Compression: Choose the streaming compression
method.
When using H.265 compression, a device that does
not support H.265 compression may prevent the
screen from being displayed.
• Resolution: Choose a resolution setting for video
streaming. The resolution varies depending on the
camera model. The current stream resolution cannot
be higher than the higher stream resolution.
• Quality: Choose a quality setting for video streaming.
• Target Bitrate(Kbps): Set the target bitrate. When
Quality is set to Manual, you can configure the value
of the target bitrate. If not, the set value of the target
bitrate for each Quality appears.
• Bitrate Control: Choose a bitrate control mode for
video compression.
- CBR (Fixed Bitrate): Maintains the current bitrate
regardless of motion change in the video.
- VBR (Variable Bitrate): Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
• Frame Rate: Choose a frame rate setting for video
streaming. The fame rate of the current stream cannot
be higher than the fame rate of the higher stream if
those stream resolutions are same.
• Default Record Stream: Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD memory card recording
feature has been enabled.
Part 1 - Remote Setup
19