Troubleshooting - Autoscript Control Net HC-1 User Manual

Troubleshooting

Fault
The controllers or smart combiner
box are not powering up.
The smart combiner is not powering
up.
The hand, foot or desk controller is
powered up, but not controlling the
prompted text.
24
Check
Check that the AC or DC power sources are
connected and secured.
Check and if necessary replace the fuse.
Check that the system connections are correct and
secured.
Another controller is being constantly used by
another operator.
Comments
See the section Power Connections on page 13.
See the section Changing the Fuse (Smart
Combiner Box) on page 23.
See the sections Control Net Connections on
page 10 or Serial Connections on page 11.
See the section Priority Control on page 22.