Maintenance; Routine Maintenance; Cleaning; Changing The Fuse (Smart Combiner Box) - Autoscript Control Net HC-1 User Manual

Routine Maintenance

The Control Net controllers and smart combiner box require minimal
routine maintenance, apart from checking the connections and overall
operation periodically.
Routine checks
During use, check the following:
• Check cables for signs of wear or damage. Replace as necessary.
• Check that all cables are connected properly.

Cleaning

WARNING! Risk of electric shock. Disconnect and isolate
the product from the power supply before cleaning.
During normal use the only cleaning required should be a regular wipe
over with a dry, lint-free cloth. Dirt accumulated during storage or
periods of disuse may be removed with a vacuum cleaner. Particular
attention should be paid to all connection ports on the products.

Changing the Fuse (Smart Combiner Box)

WARNING! Risk of electric shock. Disconnect the power
cable. Fuses must only be changed by a trained and
competent person.
CAUTION! The replacement fuse must be the correct
rating: Type 20mm ceramic tube fuse rated at 0.5A 250V
AC
1.
Switch OFF and disconnect the power cable.
2.
Using a flat-blade screwdriver, remove the fuse holder and discard
the blown fuse.
3.
Replace the fuse, then reinstall the fuse holder.

Maintenance

23