SPX SPIDAR NIC-500s Operation Manual page 87

Compatibility
8. Compatibility
Many customers who purchase SPIDAR will have existing Noggin and pulseEKKO systems.
Some older systems may not be compatible with SPIDAR.
8.1 Noggins
At minimum, Noggin sensors must be a Noggin Gold. Older Noggin Sensors (for example,
Noggin Plus) will not work with the NIC-500.
In addition, the firmware on the Noggin Gold sensor may need to be updated to run with the
NIC-500N. If the Noggin sensor is connected to the NIC-500 with an older version of the
firmware, there will be an exclamation mark beside the firmware number on the System Admin
page, under Device Information (Section 4.6.1)
Contact Sensors & Software to determine if your Noggin sensor will require a field update.
Noggin cables must have a green LED on the Noggin end (Figure 8-1). If the LED is red, this
cable is not compatible with the NIC-500.
Figure 8-1: Noggin compatible cable, showing green LED
8.2 pulseEKKO
The NIC-500P and NIC-500X are compatible with pulseEKKO Pro Transducers, Transmitters
and Model 1600 Receiver. It is possible that new versions of the fibre optic cables may be
required if connecting the NIC-500 to an older pulseEKKO transmitter. Contact Sensors &
Software for specific details on compatibility to legacy pulseEKKO systems.
79