SPX SPIDAR NIC-500s Operation Manual page 62

There are several buttons available on this page, described below:
•
Shutdown – press this button to shutdown all NIC-500s.
•
Delete All Projects – press this button to delete all projects on the NIC-500
•
Browse – pressing this button in the Software Update window will open a window
allowing you to browse your local hard drive for the upgrade package, to upgrade the
SPIDAR software. After selecting the appropriate file, the screen in Figure 4-37 will be
displayed. The file has already been uploaded to the NIC-500 and will be installed after
rebooting the NIC-500.
•
Clear – if a software update is loaded, it displays a message that the software will be
installed on the next reboot. Press Clear to cancel the software update
Figure 4-37: Message displayed in the Software Update window, after browsing for a file
Figure 4-36: System admin tab
54
SPIDAR Software