Table of Contents
Advertisement
SPIDAR SDK
5. SPIDAR SDK
SPIDAR SDK (Software Development Kit) is designed for customers who would like to control a
GPR system with their own data acquisition software. SPIDAR SDK allows users to control a
Noggin or pulseEKKO GPR connected to a NIC-500,
using specific software commands sent
over an ethernet
connection. The user can develop their own software to control data
acquisition. A computer is required, however it doesn't matter what operating system is running
on the computer (Windows, Mac, Linux). SPIDAR SDK will work with NIC-500N, NIC-500P and
NIC-500X.
5.1 Activating SDK
To activate SPIDAR SDK mode, you must connect a laptop or tablet computer to the NIC-500
using an Ethernet cable (Wi-Fi is not supported in SDK mode).
Open a web browser and connect to SPIDAR
(Section
3.5). You will see the screen in Figure
5-1.
Figure 5-1: Main SPIDAR screen
Click on Admin, which will take you to the admin screen (Figure 5-2).
59
Advertisement
Table of Contents
