SPX SPIDAR NIC-500s Operation Manual page 81

Building a System
6.2 NIC-500 Mounting
NIC-500s can be mounted to the standard 30mm fiberglass tubes used on all Sensors &
Software carts, chariots and tow systems. The user need only purchase the clamps shown to
fasten to a fiberglass pole.
Figure 6-4: Clamps, pointed to with the red arrows, can be used to secure the NIC-500 to fibreglass frame
6.3 NIC-500 Stacking Hardware
When daisy-chaining NIC-500s, the stacking hardware allows the NIC-500Ns and NIC-500Ps to
be stacked on top of each other, allowing for the NIC-500s to be securely fastened together and
take up less space. The stacking hardware is shown below.
73