WE-EF FLC121 LED 2 Installation And Maintenance Instructions

Download this manual

Safety Notice

The manufacturer is discharged from liability when damage

is caused by improper use or installation.

If any luminaire and/or accessory is subsequently modi-

fied, the persons responsible for the modification shall be

considered as manufacturer.

Surge Protection

This product features built-in surge protection circuitry in

compliance with applicable standards. For comprehensive

protection of a luminaire installation against lightning

and electrical surges, it is essential to cover mains supply

and data input lines at the distribution board level, by

using respective primary (Type 1) and secondary (Type

2) surge arrestors in compliance with EN61643-11/

IEC61643-1.

WE-EF LIGHTING USA

Tel +1 724 742 0030

info.usa@we-ef.com

we-ef.com

FLC100 LED_#2_#3_050722 / 006-1074

Technical specifications are subject to change.

WE-EF LIGHTING

Installation and

Maintenance Instructions for

Projector

FLC121 LED #2

FLC131 LED #2

FLC141 LED #3

Need help?

Do you have a question about the FLC121 LED 2 and is the answer not in the manual?

Page 1 (Type 1) and secondary (Type FLC121 LED #2 2) surge arrestors in compliance with EN61643-11/ IEC61643-1. FLC131 LED #2 FLC141 LED #3 WE-EF LIGHTING USA Tel +1 724 742 0030 FLC100 LED_#2_#3_050722 / 006-1074 info.usa@we-ef.com Technical specifications are subject to change. we-ef.com...
Page 2 – Screwdriver with 3.0 mm x 0.8 mm blade ground spike to prevent galvanic corrosion. A WE-EF warranty does not cover any adverse – Set of allen keys In areas where mounting accessories are not reaction or damage, due to improper installation applicable,ensure the luminaire’s aluminium base...
Page 3 Installation 3) Check that rating shown on luminaire label The product must be installed and maintained by In case of component failure, LED replacement conforms with mains electrical supply. a suitably qualified professional in compliance with due to abnormal circumstances or at end of life, latest building/construction and/or electrical regu- replacement must be carried out by a suitably qua- 12/17 IP66...
Page 4 5) Feed mains supply cable G through the junction 7) Loosen screws M slightly. Aim luminaire in desi- box mounting plate H, while setting mounting red direction. Align luminaire in desired direc- flange A in position. To fix mounting flange A, tion.

Flc131 led 2Flc141 led 3