Operating Conditions (Including Consumables) - Epson ACULASER COLOR 2000 Service Manual

EPSON AcuLaser C2000 / AcuLaser C1000
Table 1-17. Printing Start Position Accuracy/Paper Skew
Directions
Main Scanning Direction
(c-a)
Paper skew
Sub Scanning Direction
(a-b)
*1: With A4/LT
a
c
Guaranteed
Printing Area
d
e
Figure 1-2.
Printing Start Position Accuracy/Paper Skew Descriptions
Serviceability
MTTR 30 minutes max. (average)
(Time for service technician to locate and repair a failure.)
Output Paper Curl Height (with A4/LT)
Plain paper: ± 30mm max. (same as for duplex printing)
Product Descriptions
Single-sided Duplex
printing printing
±2.5 mm
±1.5 mm
(TBD)
±3.5 mm
±2.0mm
(TBD)
b
f
Paper feed direction
Controller Unit Specifications
*1
Transparencies:
(For non-aligned B/W printing with 5% image occupation rate or color printing
with 5% image occupation
1.2.7 Operating Conditions (Including
Consumables)
Temperature and Humidity
Temperature:
Humidity:
Barometric Pressure (Altitude)
760 hPa min. (2,500 m max.)
Levelness
Max. 1° tilt (front-rear or left-right)
Illumination
3,000 lux max. (no direct sunlight)
Printer Peripheral Space (TBD)
Maintain the space shown in the diagram below around the printer to ensure
normal printer operation. (Units: mm)
± 15mm max.
10 to 35°C
15 to 85% RH no condensation
Revision E
28