Epson ACULASER COLOR 2000 Service Manual page 110

EPSON AcuLaser C2000 / AcuLaser C1000
Table 3-4. Messages (AcuLaser C2000) (continued)
LED Message
Cooling Down
Offline
Job Cancel
uuuu Toner Low
(uuuu = CMYK, only the relevant item is
displayed.)
Worn Photocondctr
Waste T Box Nearfull
Worn Fuser
Oil Roll Near Empty
Worn Transfer Belt
Standby
Ready
*1: See 6.5 Service Call Error Messages.
*2: In some cases a Jam occurs at several places at once. In such a case,
maximum 4 places can be displayed and their priority order in display and EJL
is A->B->C1->C->2->DM. The names of the Jam locations are separated by a
single space.
Jam locations and corresponding status are as follows;
1) 4012: A
2) 4008: B
3) 4009: C1, C2
4) 4017: DM
*3: Of the Values for Paper Source in the panel setting, the relevant values,
except for Auto, are displayed.
Troubleshooting
Status
Category
code
Status 1016
Status 1001
Status
Warning 2017 - 2031
Warning 2010
Warning 2011
Warning 2562
Warning 2012
Warning 2563
Status 1007
Status 1000
Printer Message
*4: Of the Values for Page Size in the panel setting, the relevant values are
displayed.
*5: Of the Values for each paper feed size in the Tray Menu in the panel setting
item, the relevant values are displayed.
Revision E
110