Furuno FAR-3210 Installation Manual page 132

3. SETTINGS AND ADJUSTMENTS
3.6.5 [OTHERS] menu
Open the main menu then select [9 RADAR IN-
STALLATION] [5 OTHERS] to open the [OTH-
ERS] menu.
[1 DEMO ECHO]
Select the type of demonstration echo to use. [EG]
(Echo Generator), [TT-TEST] or [PC]. Select [OFF]
to deactivate the demonstration echo feature.
[2 EAV W/O GYRO]
The each averaging feature can be used without a
gyrocompass. Select [ON] to use the feature without
a gyrocompass.
[3 TT FUNC]
Activate or deactivate the TT function.
[4 SUB OUTPUT]
• Magnetron radar: No use.
• Solid state radar: If the digital signal can be out-
put in the analog format to the sub monitor, select [ON].
[5 COMBINE FUNC]
Enables, disables the dual radar display. Select [ON] to enable the dual radar display.
[6 ROUTE SOURCE]
Set the IP address when receiving route information from a route source other than
FMD-3200/3300.
[7 WIND REF TEXT]
Select the format of the wind information on the [NAV data] box. For the wind refer-
ence, set on the [WIND STB] (Main menu[4 INFORMATION BOX][2 SET NAV
DATA][6 WIND STB]) menu.
[8 FERRY MODE]
Select the direction in which the antenna was in-
stalled (oriented) at [ANTENNA DIRECTION].
3-12