Other Settings - Furuno FAR-3210 Installation Manual

3. SETTINGS AND ADJUSTMENTS
3.6

Other Settings

This section describes the menu items not previously described.
3.6.1 [ECHO ADJ] menu
Open the main menu then select [9 RADAR IN-
STALLATION] [1 ECHO ADJ] to open the [ECHO
ADJ] menu.
[1 VIDEO LEVEL ADJ]
Adjust the video level manually. Set the radar as fol-
lows:
• Interference Rejector (IR): 2
• Echo Stretch (ES): OFF
• Echo Averaging (EAV): OFF
• Gain: 80
• Range: 24 NM
• Pulse Length: Long
Select [+] or [-]. Rotate the scrollwheel so that noise
just disappears from the screen. The setting range is
0 to 32. After completion of the adjustment the radar
goes into standby. If the noise does not disappear,
switch to [-]([+]) and try again.
[5 STC CURVE]
Use the default setting. Change the setting according to sea condition. The larger the
number the greater the STC effect.
[8 RING SUPPRESSION]
Remove "ring" noise which appears with the waveguide-type radar. Adjust so the rings
disappear at the range of 0.125 NM. The setting range is 0 to 255.
[9 VIDEO CONTRAST]
Select [LEGACY] for FAR-3xx0 series radar only.
Note: The [ADVANCE] setting is not available at this time.
[ VIDEO CONTRAST ] set to [ LEGACY ] at installation:
CONTRAST
4 4 4
LEVEL
3-6
CONTRAST
C
3 2 2 3
B
1 1
A
LEVEL