Technical Specifications - mectron compact piezo P2K Use And Maintenance Manual

compact piezo p2K
9 TECHNICAL SPECIFICATIONS
Device compliant with Regulation (EU)
2017/745
Classification as per IEC/EN 60601-1
Essential performance
Device for intermittent operation
Power supply voltage
Max. power consumption
Operating frequency
Power levels
Irrigation
Protections of the APC Circuit
Operating conditions
Transport and storage conditions
Altitude
Tabella 5 – Technical Specifications
32
class iia
The class definition is delegated to
the manufacturer of the dental chair
incorporating compact piezo P2K.
Applied part type B (insert tip)
IP 20 (device)
ip according to the indications provided
by the manufacturer of the dentist's unit
According to the standard IEC 80601-2-60
the device has no essential performance
60 sec. ON - 30 sec. OFF with irrigation
30 sec. ON - 120 sec. OFF without irrigation
Double isolation power supply:
• 24 v~ ± 10 % 50/60 Hz or
• 32 V ± 10 %
40 Va
automatic scan
From 24 KHz to 36 KHz
adjustable according to the indications
provided by the manufacturer of the
dentist's unit.
adjustable according to the indications
provided by the manufacturer of the
dentist's unit
Working pressure: from 1 to 6 bar
missing handpiece;
Disconnected wire cord;
insert tip not properly tightened or
broken.
from 10 °c to 40 °c
Relative humidity from 30% to 75%
Air pressure P: 800hPa/1060hPa
from -10 °C to 60 °C
Relative humidity from 10% to 90%
Air pressure P: 500hPa/1060hPa
less than or equal to 2000 meters