Step 2; Step 3 - DV8 MPBR-01 Installation Manual

INSTALLATION MANUAL

STEP 2 |

Install the other smaller
bracket in the orientation shown on the
same side that the logo is located.
Use a 4mm allen bit and the provided
M6 hardware. Leave loose to allow for
adjustment.

STEP 3 |

Install the larger bracket on
the side of the molle panel without the
logo, in the orientation shown.
Use a 4mm allen bit and provided
M6 hardware. Leave loose to allow for
adjustment.
NEED HELP?
855-680-9595